Install the drawer lock to protect your little secret
Drawer locks are basically used by every family. Drawer lock A device used to lock a drawer, which is a type of lock that is placed on an openable object to close a certain spatial extent or an instrument. Let's take a look at some of the knowledge about drawer locks.
The principle of drawer lock
Drawer lock A device used to lock a drawer. It is a type of lock that is placed on an openable object to close a certain space or an appliance. The buckle must be opened with a key or a password. Pieces.
The drawer lock installation
Preparation before installing the lock: First of all, it should be identified whether the installation lock is a drawer lock, whether the keyhole and the opening direction of the lock tongue are consistent, and the confusion of the same cabinet lock is avoided. Use the key to open the lock several times and check whether the movement of each transmission is flexible. Check whether the accessories of the lock are complete according to the manual. Tools for installation include auger, hand hammer, hand saw, screwdriver, woodworking chisel, tape measure and other tools.
Drawer lock renderings
Installation: Care should be taken during installation to avoid scratching the paint on the furniture surface. First find the center position of the lock head installation 200mm from the top edge of the drawer, and drill the through hole with a 25mm wooden drill. Take the center line of the lock head as the axis of symmetry, draw the position of the inlay according to the width of the lock box and the bottom plate, and then draw the depth of the inlay groove according to the length of the lock head and the thickness of the lock box. After painting, the saw blade is sawed on the dimension line behind the drawer panel with a hand saw, and the middle portion is removed by a chisel, and the insert groove of the bottom plate and the lock box is cut out.
